Replacement Upvc Door Handle UPVC Door Handles

Whether you're replacing your handles or adding a little more security, you can find the right handle for your door. The Upvc handles are simple to install and have the minimum 92mm central distance for multipoint locks.

The most important measurements to consider are backplate fixing centres and key hole dimensions for levers and levers. Compare these measurements carefully with your current measurements prior to ordering.

Lever/Pad

Lever pad door handles are made up of the lever handle on one side and a paddle shaped handle on the other. They are intended for use with key wind locks. However they can be affixed to multipoint split spindle external door handles and locks locks.

Our range of upvc handle lever pads are available in a range of finishes. They will be listed in the drop down list after you have identified the correct handle for your doors. Not all styles of handle are available in every finish though and it is recommended to check the sizes and technical drawings for the specific product you are looking to ensure that you can get the correct size and fit.

It is essential that when selecting a new set of Upvc lever pad handles, they are in line with the PZ (distance from the handle spindle to the middle of the hole of the cylinder) of your multipoint door locks. This is because these must be lined up for the doors to stay locked, no matter if you're looking at them from the inside or from the outside. The handles we sell are designed to work with a variety of standard cylinder locks, but you should double-check prior to making a purchase.

You will need to remove the handles on your current handle and remove the lock case if upgrading to dual spindle handle levers since this will require a split inline cylinder. You can purchase these separately. We have included a diagram of the technical aspects in the images of each product.

It is recommended to loosen the screws that are holding the sliding patio door handle replacement handle you have and then inspect the mechanism. If the screws aren't loose enough it is possible to loosen them even more. After that, you can take the spindle from the door handle and replace it with a new Upvc handle. Before you screw the handle into place it is a good idea to ensure that it is in the proper position, and you can do this by putting your finger in the gap between the frame of the door and the handle to make sure it is level.

Lever/Lever

Lever door handles are with a multi-point lock that utilizes the Euro cylinder. They are found on the majority of double doors made of aluminium, upvc doors and a few wooden doors. They come in two varieties, with the lever inside and a paddle outside. Sprung - these come with a spring cassette within the backplate that helps bring the handle lever to an upright position. Non-sprung - they do not have a spring mechanism, and will require manual pulled to bring the handle lever to a horizontal position.

To fix a door handle that is sagging you must find the hole for access to the detent or pin, which is typically an elongated or rectangular with a protruding hole that is located on the opposite side of the handle base plate. Once you have located it, loosen the set screw with the help of a screwdriver, and then take it off to allow the lever and return it to the horizontal position.

When the handle is in a horizontal position, you can re-install the screws and tighten them until the handle stays secure on the base plate. Consider applying a threadlocking solution to the screw threads in order to improve grip and prevent them from loosing over time.

Lever door handles that droop could be the result of a number of factors. The most common reason is that the fixings are too tight which causes the lever bearing to bind up against the door. It could also be that the levers may not have been adjusted at the right angle, which compresses the latch mechanism, preventing it from fully springing into action.

A common cause of a sprung lever not working properly is the spring not being in the correct position on the backplate. To check whether the handle has returned to horizontal, simply operate it.

If your door handles are loose, it is essential to spot the issue quickly, since this could lead to excessive wear on the screws and eventually to the handle falling off the base plate. You should also tighten loose screws frequently to stop them from becoming looser.

Lever/Snib

These upvc handles are also called 'Snib handle sets' and have the snib lock button on the top of the door lever. If you don't have a dummy lock device you can use this to secure the door. They are usually fitted with a Fullex 68PZ (that's 68mm between the spindle's centre and the lever or lock centre) door lock. We also stock a range of door handles with 68PZ from manufacturers like Ferco and Fab & Fix.

You can make your home more modern by changing the door window handles for wooden windows regardless of whether you're replacing the handles on your existing ones or installing new ones on doors you've built. There are various styles available for upvc door window handles for wooden windows, including the traditional levers on backplates. Other choices include straight or curved short latches, as well as knobs that resemble dummy knobs to lock multi-points. These are ideal for French doors.

Rose door handles are circular or oval-shaped versions of lever-on-backplate handles. These kinds of door handles have the knob or lever on a backplate, which sits behind the lever or knob and is sometimes called a rosette, although some backplates can be removed for concealed fixing.

There's a wide selection of chrome and coloured finishes available for these handles to complement your door and other hardware, such as hinges, knobs and bolts. Some handles come with grub screws to assist in firmly attaching the lever or knob to the spindle. Other handles are supplied with bathroom spindles that can be used to operate bathroom locks and feature a thumbturn turn as well as a release mechanism, perfect to use on doors for bathrooms.

Mortise

The tubular latch is most likely to be the cause of this in the event that your door handle is slammed shut. There are a few factors that could cause this, one of which is an unlubricated latch plate on the latch plate. This can be corrected easily by opening the door and spraying lubricant on the lock and handle. Alternatively, it could be that the latch plate has become dislodged from the backplate. This could be more complicated and will require a specialist to fix.

A multipoint door handle is the ideal solution to solve the issue of a door handle that is stuck. The handles are inserted into the faceplate of the door and are operated with an actuated thumb turn knob or key that activates a cam that locks the deadbolt. The handles come in a variety of sizes to fit different kinds of uPVC door and in a variety of attractive finishes that match existing hardware. The handles are available online or from a local locksmith. They are simple to install and come with clear directions.

You'll need to know the cylinder's PZ size in order to select the right replacement handle set. This is the distance from the edge of the inner door frame to the centre point of the hole for the handle in millimetres. You'll also require the type of lock for your door, whether it's a mortise lock or a hook lock. Once you have these measurements, the most efficient method to locate the correct handles is to filter by brand option on the website. This will narrow down your choices and allow you to choose the appropriate size from the list.

A typical handle set includes the handle unit with two screws of various lengths, drill guides, and instructions for installation. The smarter models, such as the Igloohome Smart Mortise 2+, include the complete mortice lock, which has an integrated keypad. These are more sophisticated devices and are best suited to professional installers or competent DIYers. Certain handle sets come with a variety of accessories, including weather strips, which can be used to enhance appearance of the door.