Replacing uPVC Window Handles

It is simple to change the handles on windows made of Upvc. It is essential to ensure that the replacement handle is fitted into the spindle cutouts in the window mechanism.

If you follow the steps below, any cockspur handle will fit most windows. The most important thing is the step height of the handle.

What to look for

As time passes, uPVC handles on many windows in the UK can start to show signs of wear and tear. The window handle may become shaky or difficult to operate when this happens. Anyone who is comfortable working with basic hand tools can accomplish this fairly simple task.

The first thing to do is make sure that the handle is firmly connected to the window frame, and is in a position that is open. The next step is to find the fixing pins or screws that hold the handle in position. These are typically located on the inside face of the handle. They can be removed using a screwdriver or pliers.

When the handle is loose and sagging, gently pull it back from its hinges. The next step is to find a replacement handle that is the same design and size. This can be done on the internet or in an area DIY store, and it should take five minutes using the help of a screwdriver.

One important factor to consider when replacing the uPVC window handle is its step height. This is the distance from the base of the handle until it sits on the frame of the window. This is typically an accepted measurement, however it is crucial to examine the step height of your existing handle before ordering a new one.

There are various sizes depending on the kind of handle. Inline handles for uPVC windows usually have lug centres of 31mm There are also cockspur handle types with 43mm centres. Tilt and turn handles are often found on windows made of uPVC and they feature a specific design that allows windows to be slid up to allow for ventilation, and then turned to fully open the window.

The most frequent breakage in uPVC handles is that they crack internally instead of breaking off from the base section. This can make it difficult to open. It is important to make sure that any replacement handle has the same spindle as the original one.

Remove the Old Handle

If your window handles are damaged or improperly fitted, they could cause double-glazed windows to not open or close correctly. They could even become stuck. This could be due to various factors, such as general wear and tear on the metal handle or corrosion. In these situations it is essential to seek replacement handles made of upvc as soon as possible in order to avoid further damage and loss of functionality.

One of the first things to do when replacing the handles on your windows made of upvc is to remove the old handle from the window. To do this, start by removing the screw that is encased when the door handle replacements is in its closed position. This will reveal a screw that once removed, you can begin to remove the handle itself. It is a good idea to make use of an electric screwdriver for this, as it makes the task easier and quicker.

It is also important to note that the screws on the handle could be hidden behind plastic caps, therefore it is recommended to use the Stanley knife to the screw covers and take them off. Once the old handle is removed, you should then look at the square cut on the handle's base to make sure that the new window lock handles are compatible with it. It is important to measure the length of the spindle on the old handle and then compare it with the size of the window mechanism spindle cutout.

There are three kinds of upvc handles: Espag handles with a central screw that can be turned either left or right and Cranked handles that have two screws and Spade handles that are made of flat arms and can be used either side of the upvc window. It is simple to replace the handle after you've identified one that is suitable. Simply put it in place and make sure the spindle is properly inserted into the lock mechanism. Once this is done, it should be tightened to the window frame and the replacement window handles made of upvc should be secure.

Measure the Spindle

If you're looking to replace a Upvc handle that has fallen, it's likely the spindle that holds it in place is damaged or loose. In some cases it is possible to tighten the spindle using a screw or pin. In some cases it is necessary to replace the handle. There are several types of upvc window handles. They include espagnolette handles inline or cockspur handles. They also have tilt and turn handles. Each type of handle is mounted and replaced in a different way.

Before purchasing a replacement handle it's important to know the size of the one you have. This will help ensure that the new handle is the right size and will fit correctly within the window. Fortunately, all handles follow industry standards of sizing making it fairly easy to find the correct size.

To measure the size of your handle first remove it from the window by turning it to an open position. You will then be able to see the size of the screw or pin that secures it. Use a ruler or tape measure to determine how long the spindle is. Once you know the length of your spindle, it is possible to buy a replacement door handles of exactly the same length.

The step height of a upvc window handle is also a factor to take into consideration when you are buying an alternative. The step height is the distance from the base of the handle to where it rests on the frame. Typically, this is around 21mm for uPVC windows or 9mm for aluminium window handle. Dropping something into the gap will let you determine how far the handle extends before it comes into contact with an obstruction.

Cockspur handles come with different backsets, based on the style of window you install them in. Inline the espag handle heights range from 43mm from centre to centre (two fixing points). Cockspur handles however, have different backset heights according to the shape of the window they're in. This is because they have an extension spur that extends from the handle and locks over a cockspur wedge striker.

Install the new handle

After you've chosen the new handle, make sure it is aligned with the holes for screws on the sliding door Handles. Then, secure it with the screws supplied. If you're replacing the latch lever it can be put in in a similar way to the main sliding patio door handle replacement handle. Then, you can reattach the patio door handle replacement trim to hide the mounting screws and finish off your project.

Tip: To remove the metal head from the wooden wedge Hold the handle so that its longer end is resting on the floor. Then use an hammer to tap the thin end of the handle. Be careful not to damage the handle or handle spindle.