Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to get rotten or rusty like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and may even be fatal. It is important to take the time to ensure that you're doing everything you can to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and generally fit into frames of the past easily. If you have double-paned windows that are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case you'll need to locate some plastic spacers that will aid the new pane in being able to fit properly into the frame of the window.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards fall onto the fabric rather than on the floor where they could be trodden under and cause further damage.

After the glass has been removed from the window Repair, it's best to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and fix the window. This also serves as a barrier to prevent any intruders from making their way into your home. If the distance between the window and the door is large, you might want to use security screens that has an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. As time passes, they may develop a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts or even security. It's crucial to act immediately if you discover that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sliding. To accomplish this, you'll need to open the window so that you can get to the frame. With a screwdriver, you can remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window repairs near me to test the fit after you have repositioned your hinges. If you're happy with the fit, you can tighten the screws to ensure they remain in the right place.

If you are unable to reposition the hinges, you might require replacing the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to lose tightness. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles can also become loose. This is often caused by screws that have been removed over time, but it could also be due to the mechanism of the handle wearing out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close the window and then perform an experiment to ensure that it fits. The corner joints of the sash should be aligned with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is crucial to act if you get up each morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature in your home. Most often, upvc window repair window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Based on the severity of the issue the caulking that was used up may require removal before a fresh layer can be applied. It is essential to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk and then make the area harder to clean and could reduce your energy efficiency.

Check that any drainage holes do not have debris in them, and also that the sill pan is properly angled to drain away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double-glazed window, it is more likely the issue is more with the seal rather than the frame. This can be easily fixed by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with ease It could be the hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that use hinges and like any mechanical part they will wear out over time. Changing a window hinge is essentially a simple process, but it's easier if you have someone to help hold the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused either due to opening the window in the wrong way or a faulty installation in the factory. This can often be resolved by sending us a photograph on our website. We will be more than happy to give you suggestions.

It is also important to grease the hinges on a regular basis. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the risk of a window sticking and help prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges can also be disaligned as a result of wear, creating a gap where the sash meets frame. This can be easily repaired by giving them a thorough clean, however if they are beyond repair it might be necessary to get them aligned or replaced. The interlock, which is on the hinge side of the window, may be misaligned. Again, it's possible to give them a good clean, but in some instances it could be necessary to have them replaced.

The second most frequent reason for draughts are the window seals. These are prone to wear or damaged over time, and let air escape through the gaps. Replacement of these with high-quality weatherstripping can help prevent draughts. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. These will help to keep cold air out and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security to your home with regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and eventually, they will reach a point where it is more efficient to replace them than fix them. If you are experiencing issues with your window made of upvc you should consult an expert as soon as possible.