UPVC Door Handles Replacement Guide

Replacing upvc door handles is a simple DIY project once you have the correct measurements. These measurements include the distance between the backplate of the handle's fixing centres (sometimes called PZ) and the center of the key hole.

The most common type of uPVC door handle has two inline levers, one internal and one external that is connected via a spindle. They are used to operate the multi-point lock that is found in uPVC as well as aluminium and wooden doors.

Brands and Finishes

A damaged uPVC handle could be more than a minor inconvenience. It can also leave your home vulnerable to burglars who may make the lock open and gain entry to your home. This is why it's crucial to recognize the moment your uPVC door handles are starting to fall apart and act as soon as possible.

It's good to know that replacing your uPVC handles for your front door is a relatively simple task that only requires the use of a few tools and careful measurements. In most cases, you can simply screw in your new uPVC handles and you'll be good go. It's always best to choose locks and handles that meet the highest standards of security.

You can select from a wide range of uPVC handles. They include lever/lever, pad, offset and snib handles. Lever/lever handles are a favorite among homeowners and consist of two movable handles inline. Pad uPVC handles are smaller in size, and typically feature an offset design that allows you to keep the exterior of your property secure following the entry.

An offset uPVC handle is comprised of one fixed, and one pad that can be moved. This kind of handle can be found on sliding patio door handle replacement patio doors. Snib handles look similar to offset handles, however they can also be used on uPVC French doors.

When you are choosing a replacement uPVC door handle, you must take into consideration the style of your current doors and windows. The handle should match the colour and finish of your existing doors. Certain handles come with a variety of finishes such as black and white and others are available in more stylish options like chrome or gold.

It is important to get your screw-to-screw and PZ measurements correct when taking your measurements. The PZ measurement is the distance between the centre of spindle hole and the center keyhole. The screw-to-screw measurement is the distance between the screw hole on your current handle and the closest screw on the victorian door handle frame, and it is crucial to measure it accurately in order to find the right replacement.

Measurement and Fitting

A uPVC door handle has two levers on each side of the lock mechanism, making it easy to operate from inside and out. Providing a comfortable grip and easy-to-use functionality handles are an important element of a door's security mechanism. With the proper set of uPVC handles, you can make sure your door is safe from burglars and also keep it looking beautiful at the same time.

Selecting the right uPVC handle can be a challenge and confusing because there are a variety of sizes, shapes and designs on offer. However, there are three main measurements to be considered when choosing a replacement upvc door handles option for your uPVC doors. These are the backplate fixing centers key hole, lever and lever size and the spindle size. By taking these into consideration, you can ensure that your new handle is a good fit for your uPVC door and provides an excellent fit.

It is easy to measure these points however, you must be as accurate as you can. If you're not careful, you might end with an unfit handle that doesn't match the existing one and could cause issues when opening your uPVC door. The most important measurement is the top screw on the backplate's fixing centre, which is commonly called the PZ size. This measures from the axis of the keyhole or handle lever to the centre of the screw. It is typically 92mm, but it can vary.

Make sure that the uPVC handles on your doors have the correct number of keyspindles that you need for your multi-point locking. It is ideal that they be the same as the number of keys you use to lock and unlock your uPVC doors. Certain older doors might have a single spindle to operate the lock, while more modern doors will feature two spindles, allowing for independent operation from inside and out.

The most undesirable thing to have is a sagging or drooping uPVC door handle because this could cause a huge amount of stress on the locking mechanism inside and potentially result in broken components. To avoid this, search for a set of uPVC door handles with built-in spring cassettes. They are not only visually appealing, but they will also help give your door locking mechanism a longer duration by removing some of the force that operates it.

Broken Spring Cassettes

A problem with the tubular latch may cause a stiff door handle. It is usually a straightforward fix that can be achieved by repositioning your replacement handle's internal fixing plates. Open the door and make sure there are no obvious obstructions, such as loose screws, or signs that internal components are protruding through the latch plate. If this isn't the case, it could be one of the spring cassettes inside your uPVC handle that needs to be relocated.

The simplest way to do this is to buy a door handle repair kit. It will include all the tools you need to take the handles off and then move their cassettes. Follow the instructions and you'll soon have a sagging / drooping uPVC handle that can be operated.

A Floppy uPVC handle could be caused by thermal contraction however, it is more likely to signify that the gearbox is damaged. This isn't something that you can fix at home and will require the assistance of an expert locksmith.

If you need to replace the gearbox on your uPVC door, it is essential that you choose a genuine replacement which will ensure that everything is installed properly. Using an aftermarket part that is cheaper may cause problems, such as a faulty lock or reduced security for your home.

You can also replace the whole uPVC handle and lock mechanism. This will not only fix the issue of sagging, but will also make sure that the door handle is operational and secure. This isn't a cheap or quick fix. It will require the removal of the old uPVC handles and the replacement with a brand new one. This is only applicable to double-glazed doors that have sprung handles, as the door will need be redrilled. If you want a faster and less expensive alternative, you can buy new handles that have built-in springs, which will remove the need to drill doors.

Can I put a uPVC Door Handle on an Aluminium or Timber Door?

There are many things to think about when selecting doors for your house. uPVC doors offer durability, security, and energy efficiency. aluminium doorways are contemporary and attractive. In terms of the design of the door you're planning to install the correct handle is vital. It is important to choose the appropriate handles for your home, whether you are replacing your existing ones or installing new ones. Our uPVC door handle replacement guide will help you make the right choice and install them with confidence.

Changing the handle on a uPVC door handle is easy and requires just a few tools. The first step is to remove the old handle. It is possible to remove the screws holding it in place by using the help of a screwdriver. Once the screws are removed, you can remove the handle from the door.

Next, you will need to determine the size of the door handle. To accomplish this, you'll have to locate the center of the back plate fixing holes. This is often referred to as PZ measurement. It determines the size of the handle spindle. If you are aware of this information, you'll be able to buy a door handle replacement that is the right size.

There are a variety of types of uPVC handles to suit your requirements. Some of them are designed to provide extra security features like anti-drill protection, cylinder guards and mole grips. These uPVC handles can be installed to uPVC doors, as well as wood and aluminum ones. They are ideal for people who want to enhance the security of their home.

There are also uPVC handles that are more traditional. These can be found in various finishes like black, chrome and gold. These handles are typically a little bit more expensive than standard ones, but they can add a stylish finish to your door.

After you have selected a suitable uPVC door handle, it's important that you check the dimensions before ordering. You will need to take the measurements listed above as well as the key hole and lever dimension, and backplate fixing centres to make sure that the new handle is a good fit for your door.