How to Change a Subaru Spare Key

Contact a locksmith if have lost your subaru key replacement cost key. Locksmiths are usually able to cut you a key cheaper than the dealer.

Subaru car keys are typically either smart "push-to-start" fob remote keys or simple metal keys. The Fob keys will need to be modified.

Keyless Entry System

The key fob can be used to lock and unlock your Subaru remotely. It also opens the trunk of your car or the lift gate. The remotes utilize the keypad inside your car to connect to your vehicle's computer.

Subaru models include a less known feature called PIN Code Access. It allows you to utilize a personal number sequence to open and start your car. If you have a newer Subaru Forester, Outback, Crosstrek, WRX, WRX STI, or Impreza which came with this feature, consult your owner's guide to find out how to program subaru key to utilize it.

It's likely that the battery inside the key fob is dying. The first thing to do is ensure that it's got new batteries, and you can do this with a small remote tester or a basic multimeter from your home garage.

The next step is to remove the circuit board of the transmitter from the key fob and then examine it. You will see one or two 8-digit sets. Note the first set so you can remember it. After you've done this you can begin programming the key fob at home. The procedure for programming will vary based on the type and year of your car however it's generally easy enough to do on your own.

Key Fobs

subaru lost key fob's latest models have key fobs that not only unlock doors but also turn on lights, lock the gas cap and even start the car. This last feature is particularly helpful if you've found yourself at the gas station and your car wouldn't even start because the battery in the key fob is dead.

It is likely that your Subaru's key fob, regardless of whether it is old or new and can be replaced. It's important that you remember that newer models with high levels of technological sophistication may require an outing to the dealer. With a little effort and time, you can create your own key fob replacement.

Begin by opening the case and inspecting the circuit board of the transmitter. (Instructions on opening the case are usually given in the owner's guide). There should be two or more serial numbers that have 8 digits each. Keep the first series of numbers on hand for future for reference.

Then, sit in the driver's seat and shut all the doors. Turn the key to start your vehicle and then shut off after 10 turns. Press the lock button on the key fob, then open the door to verify that all of your doors work correctly. Close the door, and then take the key off. You should hear your car buzz again, which indicates that the key fob is programmed.

Ignition System

If your Subaru keys aren't functioning as they should it could be because the key battery is dead. If you are aware of the issue, you can replace the battery in your key fob yourself. A replacement subaru key battery is cheap and relatively easy to locate. If the key fob isn't responding to your commands, it could be a different issue. To obtain a spare key, you should visit an authorized dealer. They will ensure that the key is genuine Subaru key, under warranty, and that it will be programmed for your vehicle. This is much simpler and safer than buying an aftermarket one from a retailer online.

The dealer is also able to cut keys for you provided you give them your VIN number and as proof of ownership. They'll use this information to program the new key to ensure that it will be accepted by your immobilizer. This is a more intricate process than cutting a key by hand and the dealership will charge you more.

Once the new key is programmed, you are able to switch it with your working key. It will only take you five seconds to insert the new key, so keep your working key close to the ready. When the security light ceases to flash, you can remove the new key and examine it to make sure it's working properly.

Battery Replacement

Subaru fobs are extremely useful as they can turn on the sunroof and power windows in your vehicle with just one button press. The battery inside your Subaru key cutting fob wasn't made to last forever, and will need to be changed eventually. It's good news that replacing the battery is a simple process that you can do yourself with the help of this simple guide from Capitol Subaru.

To start the process, you'll have to find the small crevice within the seam that divides the front and back of your key fob. You can open this gap using the flat-head screwdriver, which will reveal the small compartment that contains the battery. Take out the old battery and then insert a new one, ensuring that it is facing the right side upwards. After everything is in place, you can use your new key fob to lock or unlock your vehicle easily!

It's always recommended to have an additional set of keys in your possession particularly if you've lost them or they're not working properly. You can buy a new key at your local dealership or have it cut by a locksmith. It is important to ensure that your key fob is working efficiently as soon as you can to ensure that you are able to drive safely.