Replace Nissan Key Fob Batteries

If your nissan duplicate key keyfob doesn't respond to your commands, then its battery may be dead. This is a simple fix that most people can complete themselves.

To replace the battery you can either purchase the new one from a hardware shop or refer to the owner's manual for the model you own.

Change the battery

The key fob that you have in your nissan spare key model has a built in battery that can eventually lose its charge. Luckily, changing the battery on the key fob is a simple procedure that takes just about a minute to complete. First, you'll have to purchase a replacement CR2032 3V battery. It's a tiny coin cell battery often used in key fobs and it can be found in a variety of convenience stores. To open the key fob, you'll also need an appropriate pair (latex or not) of gloves as well as a small screwdriver with a flat head. Consult your owner's guide for more detailed instructions and steps prior to starting.

Turn the fob upside down and look over the backside. You will see a tiny latch that you must let go by pulling it down. This will release the mechanical key from its initial position inside the fob.

Place the battery in place and ensure it is properly aligned. Close the fob once the battery has been placed and then press the two sides of the fob together. After completing this final step, test your key fob by pressing the unlock button and watching what happens. If everything is in good condition, you're able to enjoy your Nissan's various features. It's also a good idea to re-program the key fob after replacing the battery to ensure it's functioning correctly.

Replacing the Transmitter

Your key fob is the "key" to many of your vehicle's essential functions. It can be a devastating blow should it become lost or damaged. A damaged or broken key fob could prevent you from locking or starting your car.

It's a smart idea to keep a spare keyfob at to hand in the event of an emergency. Luckily, the procedure for replacing your Nissan key fob is fairly easy. You'll need a brand new battery and a small flathead screwdriver for removing the old one, but the replacement process is a breeze and should only take just a few minutes.

You'll need an oval Panasonic CR 2032 3V battery (you can typically find them in multipacks for under $5 USD). The battery is located in the back part of the key fob. You'll require a small flathead screwdriver to gently separate the two halves. Utilize a small screwdriver to pull the clip that is located at the top of the battery to lift it out, making a note of the position. Replace the battery, and assemble the key fob. Test it to make sure it works.

As with any electronic device that you own, your Nissan Intelligent Key will eventually wear out from regular usage and require to be replaced. Protect your key fob against magnetic fields, water, and physical impacts. Don't drop it or apply too much pressure to the device.

Replacing the Key

When your Nissan key fob is dead and you're unable to use it to unlock or start your vehicle. This is a problem for those who have to travel to work in Detroit, run errands near Dearborn or enjoy some night out near Troy.

The good news is, the battery in your Nissan smart key isn't a problem to replace. You can do it at home or at the dealership and you'll typically locate a pack for $5 or less at the hardware store.

Begin by flipping over the fob and then pushing a small catch on the back. This will open the emergency mechanical keys inside. While you won't be in a position to use the emergency key to start your car however, it will allow you to open the door.

Look for a small opening on the top of the casing. These are perfect to insert screws into, allowing you to pry the two pieces of the key fob apart. Once you've accessed the internal battery, you can remove it and note its position. When you are ready to reassemble your key fobs, insert the new battery and then snap the two pieces of the case back together. Insert the mechanical key and your nissan replacement car keys smartkey will work just as normal.

Other Issues

Many modern cars are fitted with key fobs that allow you how to get a new key fob nissan lock and unlock them without having the physical car key. To do this the key fob utilizes an electronic transmitter to connect with the car's computer system.

If your Nissan key fob stops working after you replace the battery it could be due to many reasons to blame. One possibility is that the new battery wasn't properly fitted into the key fob. Resetting the key fob is another possibility. This is a simple procedure that can be completed at home using just a few simple tools.

You'll need, for instance a screwdriver that has an angled tip to remove the battery that was in the key fob. Then, you'll need a screwdriver to pry open the back of the key fob and insert the new battery. You'll also have to reprogramme your key fob in order for it to work with your vehicle.

Fortunately, the majority of Nissan key fobs are user-programmable which means you can do it yourself. It is usually done by inserting the key fob into the ignition two times within five seconds. If this isn't working, you can take your key fob in to a dealer or an auto locksmith to have it programmed. The cost for this will differ depending on the company you contact and the type of car you have.